A ready-to-use evaluation board combining ESP32 and DW1000 for UWB-based ranging and positioning applications. Ideal for IoT developers and researchers building indoor localization systems.
- Combines ESP32-WROOM-32 and Decawave DW1000 for UWB-based indoor positioning.
- Ideal for asset tracking, indoor navigation, and UWB research.
- Features: Integrated UWB antenna, USB power, Wi-Fi + Bluetooth, 3.3V logic.
- Includes board, micro-USB cable (optional), quick start guide, and GitHub repo.
A compact evaluation board featuring NXP’s FXOS8700CQ 6-axis sensor, combining a 3-axis accelerometer and 3-axis magnetometer for motion and orientation sensing applications.
- Features NXP’s 6-axis sensor with 3-axis accelerometer + 3-axis magnetometer.
- Selectable ±2g/4g/8g acceleration, ±1200 μT magnetic range.
- Ideal for motion sensing, robotics, and guidance systems.
- Includes board, header pins, quick start guide, and GitHub repo.
The ESP32 S3-MOD-8M is a compact dual-core Wi-Fi + Bluetooth 5 LE module with 8MB SPI flash, ideal for AIoT and smart devices.
It supports USB 1.1 OTG, low-power operation, and wide 3.0–3.6V input.
Pin-compatible with ESP32 S3-WROOM-1, it enables fast, scalable IoT development.
- Dual-core Xtensa LX7 processor up to 240 MHz
- 8MB SPI flash memory
- Wi-Fi 802.11 b/g/n + Bluetooth 5 LE
- Native USB 1.1 OTG support
- Wide voltage (3.0V–3.6V), industrial temperature (-40°C to +85°C)
- Compatible with ESP32 S3-WROOM-1, compact 19.2 × 18 mm footprint
The ESP32-DW3210 UWB Evaluation Board integrates an ESP32 MCU with the DW3210 UWB transceiver for precise indoor positioning.
Its ADRF5019 RF switch enables easy selection between onboard and external antennas via SMA and jumpers.
Ideal for UWB ranging, antenna testing, and IPS prototyping.
- Integrated ESP32 microcontroller for wireless communication and control
- High-precision DW3210 UWB transceiver for ranging and positioning
- ADRF5019 SPDT RF switch for antenna path selection
- Onboard UWB chip antenna for compact indoor use
- SMA connector for external high-gain antenna support
- Ideal for UWB IPS, wireless sensor networks, and antenna evaluation
The Vacus ESP32-S3 Dev Module, powered by the ESP32-S3-MOD8M, offers dual USB ports (UART & OTG), boot/reset buttons, and an RGB LED for versatile IoT development.
Its 240 MHz dual-core processor and low-power modes suit both prototyping and deployment.
Ideal for wearables, wireless sensors, and AIoT projects.
- Dual USB Ports (USB‑to‑UART + native USB OTG) for programming + host/device support
- ESP32‑S3‑MOD8M, a 240 MHz dual‑core MCU, enabling high‑speed computing + wireless (WiFi/BLE)
- Boot & Reset Buttons for easy firmware flashing and system control
- Onboard RGB LED tied to user GPIO for status indication or visual feedback
- Low Power Modes with deep sleep current as low as ~10 µA, plus typical WiFi TX/RX currents (120 mA / 80 mA)
S.T. Bed, 1st Block Koramangala,
Koramangala, Bengaluru, Karnataka 560034
starts here - contact
Vacus now
